No products in the cart.
GEL BALL GROW GUIDE
This guide is designed to give you a thorough understanding of how to grow and store the range of Ausgel Gel Balls. Gel balls need to be hydrated (grown) in water before they can be used in your Gel Blaster. It is important to note that different gel blasters will work better with different gel balls. There are however, some generic tips on what not to do, as follows
DO NOT
• Do Not Store gels in freezer - Contrary to popular belief, this will not make your gels harder. Freezing will make your gels brittle and more prone to breaking when firing your blaster.
• Do Not Add dish washing liquid or any other lubricant to the water - this can damage your blaster internals.
• Do Not Add food colouring or dye to your grow water. You will really annoy other gel ballers if they can't wash the colour out of their clothes.
• Do Not Attempt to use hardening agents - This will usually cause your gels to warp. If you want hard gels, use our Ultras.
• Do Not Use anything other than gels in your gel blaster.
• Do Not Eat the gels. Although they are non-toxic, they will grow in size when hydrated in liquid.
ITEMS YOU WILL NEED
• Clean water. Demineralised water is best (available from Bunnings), clean tap water is fine but you should avoid using rainwater. Bottled water is also a great option.
• Something to grow the gels in. This could be a bucket, eski or any kind of tub that can hold at least 3 litres of water.
• Something to store the gels in. Airtight containers are best from any super market or home ware store.
• A sieve or sifter to drain the water from gels prior to use.
• Optional (for best results): A fish tank filter and pump to keep the water agitated during the grow.
• For Ultras: A timer, whether it be your phone or clock.
• Optional: A food thermometer.
Step 1: Pour at least 2 litres of CLEAN water into your grow container, then add 1 packet of Ultra Elite gels (in dry form).
Step 2: Allow gels to grow as per below:
• 1 Hour for 6mm gels
• 3.5 Hours for 7.2 – 7.3mm gels
(RECOMMENDED)
Step 3: Remove gels from water – they are now ready to use in your gel blaster.
Notes: Ultra Elite gels can be stored in an airtight container, or in water.
- If storing in an airtight container, gels will retain strength for up to 2 months – ensure you wet the gels prior to each use.
- If storing in water it is recommended that gels are used within 2 weeks. After 2 weeks, they will retain most of their strength for up to 3 months in water.
- If storing in water it is recommended to change the water weekly to keep clean.
- Recommended Barrel Size: 7.3mm Inner Diameter (3.5 hour grow)
Ultra gels are designed for use in modified blasters pushing above 300 fps.
Step 1: Pour at least 2 litres of CLEAN water into your grow container then add 1 packet of Armour Tech Ultra/Pink/Red gels.
Step 2: Allow the gels to grow as per below:
• 3 - 3.5 hours - for 7.3mm sized gels
• 4 hours + for 7.4mm sized gels,Br.
Step 4: Remove the gels from water. They are now ready for use in your gel blaster.
Step 5: AT Ultra gels should be stored in an airtight container, away from heat sources or direct sunlight.
If the container is not airtight, the gels will deform. They can be stored for further use for up to 6 months.
Pink and Red Ultras can be stored in water.
Step 1: Pour at least 2 litres of CLEAN water into your grow container then add 1 packet of Armour Tech Ultra/Pink/Red gels.
Step 2: Allow the gels to grow as per below:
• 3 - 3.5 hours - for 7.3mm sized gels
• 4 hours + for 7.4mm sized gels,Br.
Step 4: Remove the gels from water. They are now ready for use in your gel blaster.
Step 5: AT Ultra gels should be stored in an airtight container, away from heat sources or direct sunlight.
If the container is not airtight, the gels will deform. They can be stored for further use for up to 6 months.
Pink and Red Ultras can be stored in water.
Step 1: Pour at least 2 litres of CLEAN water into your grow container, then add 1 packet of Armour Tech White Pearl gels (in dry form).
Step 2: Allow gels to grow as per below:
• 1 hour - for 6mm sized gels
• 1.5 hours for 6.9 - 7.1mm sized gels.
• 3.5 hours for 7.2 - 7.5mm sized gels.
(RECOMMENDED)
Step 3: Remove gels from water – they are now ready to use in your gel blaster.
Notes: If using in a CO2 Blaster, white pearls should be used within 48 hours. White pearls that have been grown for 3 hours or less, should be stored in an airtight container. Gels grown for 3.5 hours or more can be stored in water, but will swell to 7.5-7.6mm and lose some strength, so it is recommended to grow the White Pearl gels for same or next day use.
Recommended Barrel Size: 7.5mm Inner Diameter (3.5 hour grow)
This range of gels is designed for use in all blasters up to 320 fps.
Step 1: Pour at least 3 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of AT Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 4 hours.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Armour Tech Green/Yellow/White gels can be stored dry in an airtight container, or submerged in water, for further use for up to 6 months.
If storing in water, change the water weekly.
Step 1: Pour at least 3 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of AT Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 4 hours.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Armour Tech Green/Yellow/White gels can be stored dry in an airtight container, or submerged in water, for further use for up to 6 months.
If storing in water, change the water weekly.
This range of gels is designed for use in all blasters up to 300 fps and are slightly more consistent than original gels.
Step 1: Pour at least 3 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of Super Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 4 hours.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Super gels should be stored submerged in water, for further use for up to 4 months.
Remember to change the water weekly.
Step 1: Pour at least 3 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of Super Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 4 hours.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Super gels should be stored submerged in water, for further use for up to 4 months.
Remember to change the water weekly.
This range of gels is designed for use in all blasters up to 300 fps and are perfect for use as hire blaster gels for fields.
Step 1: Pour at least 2 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of Original Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 3 hours 30 minutes.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Original gels should be stored submerged in water, for further use for up to 12 months.
Remember to change the water weekly.
Step 1: Pour at least 2 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of Original Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 3 hours 30 minutes.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Original gels should be stored submerged in water, for further use for up to 12 months.
Remember to change the water weekly.
About Us
PO Box 62
Burpengary
Brisbane
QLD 4505 Australia
- +61 0400 508 451
- sales@ausgel.com.au